Page 259
257
Types of certificates available with
Elga welding consumables
Certificates for Elga consumables are available in
accordance with EN 10204,”Metallic products –
Types of inspection documents”
Test report type 2.2
Shows typical values for chemical analysis and
mechanical properties, according to the relevant
data sheet. This information is not batch specific
and is available free of charge.
Inspection certificate type 3.1
The following are available as standard for different
product types.
•Solid wire products
Chemical analysis of the specific wire batch, to-
gether with typical mechanical properties based on
annual testing statistics.
•Coated electrodes: Low alloyed and stainless
steel.
All-weld metal chemical analysis of the specific
batch, together with typical mechanical properties
based on annual testing.
•Cored wires
All-weld metal chemical analysis and mechanical
properties of the specific batch.
Standard inspection documents are free of charge,
but must be clearly specified on the order.
Special certificates
In addition to the above inspection documents, it
is possible to receive certificates showing extended
batch testing according to customer requirements,
but these must be clearly specified in advance on
the order and will be charged according to current
Elga laboratory testing fees.
TEST REPORT
Test report according to
EN 10204 2.2
Order No ELGA Order No Specification Data sheet rev.
AWS/ASME SFA 5.1:E 7024 18
EN-ISO 2560-A:E 42 0 RR 73
Product Batch No Part No
Maxeta 11 4,0x450
12421 72044000
All-weld metal c
hemical composition, wt. %
. For solid wires; wire analysis
C Si Mn P S Cr Ni Mo Cu
0,08 0,60 0,90 0,015 0,010 0,03 0,04 0,005 0,02
Mechanical properties - All-weld metal.
Yield
Strength,
MPa
Tensile
Strength,
MPa
Elongation,
A5%
Impact value
average,
J
Test temp,
°C
500 580 24 50 0
We hereby certify that the material described above has been tested
and complies with the terms of the order contract.
Lisa Eriksson, QC Manager
DATE: 111025