Page 60
Most popular accessories
•
SubArc Control Cables (pg 62)
260622030 9.1 m (30 ft.)
260622050 15 m (50 ft.)
260622060 18.3 m (60 ft.)
260622080 24.4 m (80 ft.)
260622100 30.5 m (100 ft.)
260622120 36.6 m (120 ft.)
260622200 61.0 m (200 ft.)
SubArc Interface Controls See literature no. ADM/10.0 UK
Easier setup and operation. The SubArc Digital Series
Interface controls recognize the power source and wire drive
connected, and automatically configure the system for
proper operation.
Internal terminal strip is able to integrate with positioners,
sidebeams, turning rolls and other peripheral equipment.
Input Power from Welding Power Source
24 VAC, 1-phase, 25 A, 50/60 Hz
Model/Stock Number
SubArc Interface Digital (300936)
Welding Power Source Type
Constant voltage (CV), AC or DC,
with remote contactor and
output control capabilities
IP Rating
IP23
Dimensions
H: 292 mm (11.5 in.)
W: 305 mm (12 in.)
D: 178 mm (7 in.)
Net Weight
7.2 kg (15.8 lb.)
Most popular accessories
•
Continuum Motor/Control Cables
(pg 62)
263368015 4.6 m (15 ft.)
263368020 6.1 m (20 ft.)
263368025 7.6 m (25 ft.)
263368050 15 m (50 ft.)
263368080 24.4 m (80 ft.)
2633680100 30.5 m (100 ft.)
•
SubArc Control Cables (pg 62)
260622030 9.1 m (30 ft.)
260622050 15 m (50 ft.)
260622060 18.3 m (60 ft.)
260622080 24.4 m (80 ft.)
260622100 30.5 m (100 ft.)
260622120 36.6 m (120 ft.)
260622200 61.0 m (200 ft.)
SubArc Remote Operator Interface
Most popular accessories
•
Motor Extension Cables (pg 62)
254232005 1.5 m (5 ft.)
254232010 3 m (10 ft.)
254232025 7.6 m (25 ft.)
254232065 19.8 m (65 ft.)
•
Drive Rolls (pg 62)
•
Manual Slide (pg 62)
•
Single-Wire Straightener 199733
(pg 62)
•
Twin-Wire Straighteners
(for twin-wire torches only) (pg 62)
301160 Single adjustment
301162
Double/separate adjustment
SubArc Wire Drive Assemblies
See literature no. ADM/10.0 UK
Point-of-use installation.
Remote Pendant can be handheld
or secured at point of use to
improve operation.
Remote installation. Motor
Control can be remotely installed,
resulting in reduced cables at the
operator workstation.
Side handles on Remote Pendant
provides option for handheld
operation with full functionality
of a traditional SubArc Interface.
Remote Pendant DigitalMotor Control Digital
Input Power from Welding Power Source
24 VAC, 1-phase, 25 A, 50/60 Hz
42 VDC, 1 A
Model/Stock Number
SubArc Motor Control Digital (301425)
(requires SubArc Remote Pendant Digital below
and Continuum control/motor cable)
SubArc Remote Pendant Digital (301424)
(requires SubArc Motor Control Digital above
and Continuum control/motor cable)
Welding Power Source Type
Constant voltage (CV), AC or DC,
with remote contactor and
output control capabilities
IP Rating
IP23
Dimensions
H: 292 mm (11.5 in.)
W: 305 mm (12 in.)
D: 178 mm (7 in.)
H: 279 mm (11 in.)
W: 270 mm (10.63 in.)
D: 80 mm (3.125 in.)
Net Weight
7.2 kg (15.8 lb.)
1.4 kg (3 lb.)
SubArc Strip Drive 100 Digital
Low Voltage is a heavy-duty, right-
angle drive assembly designed for
automated strip clad applications.
SubArc Wire Drive 400 and 780
Digital Low Voltage are right-angle
wire drive assemblies. The 400
model is standard speed and the
780 is high speed.
SubArc Strip Drive 100
Digital Low Voltage
SubArc Wire Drive 400
Digital Low Voltage
Model
SubArc Strip Drive 100
Digital Low Voltage
SubArc Wire Drive 400
Digital Low Voltage
SubArc Wire Drive 780
Digital Low Voltage
Stock Number
(300940) With mounting bracket
(300938) Standard speed
(300941) High speed
Wire Feed Speed
0.3–1.6 mpm
(10–69 ipm)
0.8–10.2 mpm
(30–400 ipm)
1.3–19.8 mpm
(50–780 ipm)
Wire Diameter Capacity
N/A (strip cladding applications)
2.4–4.8 mm (3/32–3/16 in.)
1.6–3.2 mm (1/16 –1/8 in.)
Input Power
38 VDC
38 VDC
38 VDC
Rating
1/5 hp, 21 rpm
1/5 hp, 85 rpm
1/4 hp, 143 rpm
IP Rating
IP23
IP23
IP23
Input Power Cord
1.2 m (4 ft.)
1.2 m (4 ft.)
1.2 m (4 ft.)
Net Weight
13 kg (29 lb.)
11.8 kg (26 lb.)
11.8 kg (26 lb.)
60
Submerged Arc