Accessories
TIG Accessories
Protective Covers
301381 For Maxstar 210 DX.
301382 For Maxstar 280 DX
and Dynasty
210 DX/280 DX.
195478 For XMT 350/425.
Remote Controls
RMLS-14 (14-pin plug) 129337
Momentary- and maintained-contact rocker switch for
contactor control. Push forward for maintained contact and
backward for momentary contact. Includes 8 m (26.5 ft.)
cord with plug.
RFCS-6M (6-pin plug)
195183 4 m (13.25 ft.) cord with plug
195504 6 m (20 ft.) cord with plug
For STi and STH 160.
RFCS-14 (14-pin plug)
043554 6 m (20 ft.) cord with plug
Foot pedal current/contactor control.
RMS-6M (6-pin plug) 195269
For STi and STH 160.
RMS-14 (14-pin plug) 187208
Momentary-contact switch for contactor control. Rubbercovered pushbutton dome switch ideal for repetitive on-off
applications. Includes 8 m (26.5 ft.) cord with plug.
14-Pin to 6-Pin Adapter Cord
300507
For STi and STH 160. 305 mm
(12 in.) cord adapts Miller® 14-pin
foot control or fingertip control to a
6-pin plug.
RCC-6M (6-pin plug)
301118 4 m (13.25 ft.) cord with plug
For STi and STH 160.
RCC-14 (14-pin plug)
151086 8 m (26.5 ft.) cord with plug
East/west rotary-motion fingertip current/contactor control
attaches to TIG torch using two hook-and-loop fasteners.
Great for production or contractors that need quick ramp-up.
RCCS-6M (6-pin plug)
195184 4 m (13.25 ft.) cord with plug
195503 8 m (26.5 ft.) cord with plug
For STi and STH 160.
RCCS-14 (14-pin plug)
043688 8 m (26.5 ft.) cord with plug
North/south rotary-motion fingertip current/contactor control
attaches to TIG torch using two hook-and-loop fasteners.
Great for applications that require a finer amperage control.
HF 5000
RFCS-14 HD (14-pin plug) 194744
Heavy-duty foot pedal current/contactor control provides
increased stability and durability from larger base and
heavier cord. Cord can exit front, back or either side of the
pedal for flexibility. Includes 6 m (20 ft.) cord with plug.
RPBS-14 (14-pin plug) 300666
Attaches to the TIG torch to remotely start and stop the TIG
welding process. Includes 7.6 m (25 ft.) cord with plug.
SHRC-14 Remote Control
058040019 5 m (16.4 ft.)
058040020 10 m (32.8 ft.)
058040021 20 m (65.6 ft.)
Single-hand control for current only.
RHC-14* (14-pin plug)
242211020 6 m (20 ft. ) cord with plug
242211100 30.5 m (100 ft.) cord with plug
Miniature hand current/contactor control.
Dimensions: 102 x 102 x 82 mm (4 x 4 x 3.25 in.).
Torch Connector
273483
For STi and STH 160. 25 mm (small)
Dinse-style gas thru for one-piece
air-cooled torches.
See literature AYM/5.1
High-frequency arc starter provides excellent arc starting for DC TIG welding.
Excellent arc starting on thin stainless steel, brass,
copper, and a range of ferrous and non-ferrous alloys
Lightweight, portable design can be easily moved around
the workplace.
Compatible with Miller constant-current DC power
sources and others that feature a 14-socket receptacle.
Thermally protected secondary terminals automatically
shut off the unit if duty cycle is exceeded.
Easy-to-read front panel includes ammeter display and a
push-button interface with amperage and set-up controls.
Fan-cooled design protects the unit from overheating.
115 V (50/60 Hz) input meets most single-phase power
configurations, and is rated at 100 percent duty cycle.
Gas solenoid valve offers exact control over pre-flow
ranges and built-in post-flow eliminates contamination.
Stock Number
V29012345
14-pin receptacle on the front panel allows for easy
remote control connection.
Quick-connect fittings allow for quick installation of
water-cooled TIG welding torch.
Circuit breaker protects unit from primary power overload.
Input Power
Welding Amperage Range
Welding Voltage Range
Rated Output
IP Rating
Dimensions
Net Weight
115 V, single-phase,
500 mA, 50/60 Hz
5–450 A
10–95 V
400 A at 34 VDC,
100% duty cycle
IP23
H: 265 mm (10.4 in.)
W: 250 mm (9.8 in.)
D: 420 mm (16.5 in.)
13 kg
(28.7 lb.)
65