ALUMINIUM
GMAW
AlumaFeed
®
MIG
Heavy industrial
Synergic Aluminium Welding System
Processes
See literature DC/34.0
Dedicated aluminium system for the most advanced MIG and synergic pulsed MIG performance.
Aluminium MIG (GMAW)
• Aluminium
pulsed MIG (GMAW-P)
•
AlumaFeed System consists of
the following (sold separately)
350 MPa power source
• AlumaPower
(907420003) OR 450 MPa power
source (907526)
feeder
• XR-AlumaFeed
XR-Aluma-Pro OR XR -Pistol Grip
• push-pull
MIG gun
Coolmate 3 cooling system with
• coolant
(water-cooled systems only)
• Universal trolley
Most popular accessories
Guns (pg 26)
• XR Push-Pull
Trolley 018035028 (pg 63)
• Universal
Kit for Universal Trolley
• MIG
058066129 (pg 63)
3 Mounting Brackets for
• Coolmate
Universal Trolley 028066301 (pg 63)
3 043007 (pg 64)
• Coolmate
043810 (pg 64)
• Coolant
Cables (pg 66)
• Extension
247831025 7.6 m (25 ft.)
™
™
™
™
AlumaPower 350 MPa and XR-AlumaFeed with
XR-Aluma-Pro gun air-cooled system shown.
™
™
•
•
AlumaPower ™ 350 model allows
for any input voltage hookup
(230–575 V, three-phase) with no manual linking,
providing convenience in any job setting. Ideal solution
for dirty or unreliable power. 450 model is 400 V only,
three-phase.
Built-in MIG and pulsed MIG programs automatically
set the optimal parameters for a wide variety of wires
making it easy to set up and use.
Synergic pulsed MIG. As wire speed increases/decreases,
pulse parameters also increase/decrease to match the
right amount of power needed, eliminating the need to
make additional adjustments.
Synchronized, true push-pull wire feed system for
precise wire feeding and arc performance.
247831050 15 m (50 ft.)
247831080 24.4 m (80 ft.)
1.6 mm (1/16 in.) Liner and
Wire Kit for Gun 230708
1.6 mm (1/16 in.) Drive Roll Kit for
Control Box 195591
Profile Pulse™ provides TIG
appearance with MIG simplicity
and productivity. Achieve
“stacked dimes” without gun
manipulation. Profile Pulse frequency can be changed
to increase or decrease the spacing between the ripple
pattern to achieve the desired weld appearance.
Parameter and system locks enhance quality assurance
and protect weld consistency.
Trigger schedule select allows operator to change
between two sets of weld parameters.
Fan-On-Demand™ cooling system operates only when
needed, reducing noise, energy use and amount of
contaminants pulled through machine.
Note: All systems come set up out of the box to run 1.2 mm wire. 1.6 mm consumables not included — order separately above.
See aluminium solutions comparison chart on page 10.
Welding
Output Ranges
Rated Output
AlumaPower 350 MPa
(907420003)
230–575 V
with auxiliary power
5–425 A
10–38 V
AlumaPower 450 MPa
(907526) 400 V
with auxiliary power
15–600 A
10–38 V
XR-AlumaFeed
Wire Feeder
14-pin compliant, but
only operates synergically
w/MPa power sources
Input Power
Input Welding Circuit Rating
Wire Feed Speed
Wire Diameter Capacity
Maximum Spool Size Capacity
Dimensions
Net Weight
24 VAC,
5 A,
50/60 Hz
400 A at 100% duty cycle
System duty cycle is limited
to gun rating
1.3–22.9 mpm
(50–900 ipm)
0.9–1.6 mm (.035–1/16 in.)
Requires wire kit (230708) for gun and drive roll kit
(195591) for control box to run 1.6 mm (1/16 in.) wire
305 mm (12 in.)
H: 406 mm (16 in.)
W: 241 mm (9.5 in.)
D: 540 mm (21.25 in.)
19.2 kg
(42.5 lb.)
Model
IP
Rating
Amps Input at Rated Load Output, 60 Hz
230 V
400 V
460 V
575 V
KVA
KW
Max. OpenCircuit Voltage
Dimensions
Net Weight
350 A at 34 VDC,
60% duty cycle
IP23
36.1
20.6
17.8
14.1
14.2
13.6
75 VDC
H: 432 mm (17 in.)
W: 318 mm (12.5 in.)
D: 610 mm (24 in.)
36.3 kg
(80 lb.)
450 A at 36.5 VDC,
100% duty cycle
IP23
—
29.8
—
—
21.6
18.3
90 VDC
H: 438 mm (17.25 in.)
W: 368 mm (14.5 in.)
D: 689 mm (27.125 in.)
55.3 kg
(122 lb.)
11