Page 14
Heavy industrial
Processes
•
MIG (GMAW)
•
Flux-cored (FCAW)
•
Pulsed MIG (GMAW-P)
•
Air carbon arc gouging (CAC-A)
(Invision 352: 6 mm carbons)
(Invision 450: 8 mm carbons)
Invision MPa System consists of
the following (sold separately)
•
Invision 352 MPa power source
(907431002) OR 450 MPa power
source (907524)
•
70 Series MPa Plus feeder
•
XR-Aluma-Pro
™
Plus OR XR
™
-Pistol Plus
push-pull MIG gun
•
Coolmate
™
3 cooling system with
coolant (water-cooled systems only)
•
Universal trolley
Most popular accessories
•
XR
™
Push-Pull Guns (pg 26)
•
Universal Trolley 018035028 (pg 63)
•
MIG Kit for Universal Trolley
058066129 (pg 63)
•
Coolmate
™
3 Mounting Brackets for
Universal Trolley 028066301 (pg 63)
•
Coolmate
™
3 043007 (pg 64)
•
Coolant 043810 (pg 64)
•
Extension Cables (pg 66)
247831025 7.6 m (25 ft.)
247831050 15 m (50 ft.)
247831080 24.4 m (80 ft.)
•
1.6 mm (1/16 in.) Liner and
Wire Kit for Gun 230708
Invision
™
MPa Plus System See literature DC/23.6
Invision 352 MPa with S-74 MPa Plus feeder shown.
Note: See aluminium solutions comparison chart on page 10.
Max. Open-
Circuit Voltage
75 VDC
90 VDC
KW
13.6
18.3
KVA
14.2
21.6
Model
Invision 352 MPa
(907431002) 230–575 V
with auxiliary power
Invision 450 MPa
(907524) 400 V
with auxiliary power
Welding
Output Ranges
5–425 A
10–38 V
15–600 A
10–38 V
Amps Input at Rated Load Output, 60 Hz
230 V 400 V 460 V 575 V
36.1 20.6 17.8 14.1
— 29.8 — —
Dimensions
H: 432 mm (17 in.)
W: 318 mm (12.5 in.)
D: 610 mm (24 in.)
H: 438 mm (17.25 in.)
W: 368 mm (14.5 in.)
D: 689 mm (27.125 in.)
Net Weight
36.3 kg
(80 lb.)
55.3 kg
(122 lb.)
Rated Output
350 A at 34 VDC,
60% duty cycle
450 A at 36.5 VDC,
100% duty cycle
IP Rating
IP23
IP23
Recommended Aluminium Solution
Dedicated XR Plus guns work with MPa
Plus feeders to coordinate wire feed
speed of the gun and the feeder. This
provides optimized aluminium feeding
and welding performance. See page 26
for stock numbers.
14
Invision 352 model allows for any
input voltage hookup (230–575 V,
three-phase) with no manual linking, providing
convenience in any job setting. Ideal solution for dirty
or unreliable power. 450 model is 400 V, three-phase.
Built-in MIG and pulsed MIG programs auto matically
set the optimal parameters for a wide variety of wires
making it easy to set up and use.
Synergic pulsed MIG. As wire speed increases/
decreases, pulse parameters also increase/decrease
to match the right amount of power needed,
eliminating the need to make additional adjustments.
Profile Pulse
™
provides TIG
appearance with MIG simplicity
and productivity. Achieve
“stacked dimes” without gun
manipulation. Profile Pulse frequency can be changed to
increase or decrease the spacing between the ripple
pattern to achieve the desired weld appearance.
Easy to set up. Select wire diameter, wire type and gas
being used, set your wire speed and strike an arc.
Wind Tunnel Technology.
™
Air flow that protects internal
components, greatly improving reliability.
Fan-On-Demand
™
cooling system operates only when
needed, reducing noise, energy use and amount of
contaminants pulled through machine.
MIG and synergic pulsed MIG system with optimized weld programs for both steel and aluminium.
MIG GMAW